Any tips
Any tips
Sort replies:
You have a Matx motherboard in an Atx chassi, for 100kr more you can get ram with better cl for a smoother user experience. I think the chassi isn't worth the money, used in a lot of pre-builds and got nothing special about it. The psu ain't great, the Nzxt is better and costs 998 kr on Amazon right now.
If you want to have another model on the graphic card i would probs go with: https://komponentkoll.se/produkt/1392844-gigabyte-radeon-rx-7900-gre-16gb-gaming-oc
Gpu benchmarks: https://www.techpowerup.com/review/sapphire-radeon-rx-7900-gre-pulse/31.html
Psu tier list: https://cultists.network/140/psu-tier-list/
Thank you for your response. I will be building my PC from Inet, as I am not familiar with building computers. The price difference is quite significant, so I think I will stick with RX 7800XT. I don't need a more powerful computer and it would be a significant cost increase. However, I may consider using the power supply you recommended.
If you want a pre built this one might be a good choice you will have to swap out some parts in there part picker page: https://www.komplett.se/product/1307024/gaming/gamingdator/gamingdator-stationar/komplett-pc-advanced-gaming-a152-rgb
On the right side of the page there are three buttons, one yellow, one dark blue and one green blue that say "ANPASSA INFÖR KÖP" if you click on the green blue on you can change parts.
Once there pick the parts that you want, it would look something like this: https://imgur.com/a/Vf9HSoY
And the Kingston Fury Beast RAM you mentioned on the Inet site shows that it's not compatible, as it says 'The speed of the internal memory exceeds the standard speed of the motherboard
Computer parts can vary in prices from site to site, so what parts you pick can be different if you want to buy everything from a specific retailer. I did two builds here, one with what would be the direct replacement for the computer above but as close to the budget as before and one that is more barbone but still the same performance level.
What budget do you have for this computer (with building cost)?
Replacement for the computer above: https://www.inet.se/kundvagn/visa/EewoAWbh1gk0LMFBhp_BZZko8Ys/namnlos
Barbone: https://www.inet.se/kundvagn/visa/E-woAbmI6jvYUTBPs_6xnnLpdKc/namnlos
The psu (DeepCool PL750D 750W ATX 3.0) has a Delayed delivery, so not sure when it will be in stock but its the best choice that i could find. I can take one more look if you want another alternative, just so you know if they build it, you have to buy a psu from them.
Ah yeah what they mean with "internal memory exceeds the standard speed" is that if the memory is faster then 4800 mhz its more or less an "overclock" (not really but mby). There is software that you get with the motherboard/cpu platform that is called Amd Expo which is used for overclocking the memory to the speed you see on the box.
So if something is 6000 mhz with Amd Expo then it's an overclock (non motherboard standard speed) profil which sets the ram to 6000 mhz, if you build the computer yourself that is something you enable in bios but if you get it pre built then the technician should have enabled it.
My budget is 18,000 kr. I've built a PC on Inet and I'm wondering if it's a good build. Here are the details:
Chassis: Montech SKY TWO Svart CPU: AMD Ryzen 5 7600X GPU: PowerColor Radeon RX 7800 XT, 16GB, Red Devil edition Motherboard: ASUS TUF Gaming B650-Plus WIFI RAM: Kingston 32GB (2x16GB), DDR5, 5200MHz, CL36, FURY Beast, AMD EXPO/Intel XMP 3.0 Storage: Kingston NV2 M.2 NVMe Gen 4, 1TB CPU Cooler: Thermalright Peerless Assassin 120 SE, Svart ARGB Power Supply: NZXT C750, 750W, v2 I'd appreciate your thoughts on this build - do you think it's a good combination of components?
It all works, not the best parts over all.
Montech SKY TWO: is a bit overpriced for what you get, last year this one cost around 700kr - 800kr at times so paying full price is not really worth it. I would look at Phanteks XT View instead if you want a showcase.
Kingston 32GB (2x16GB), DDR5, 5200MHz, CL36, FURY Beast; Slow and cost a lot.They work but are not worth the money. The ones I picked are faster and cost the same.
Kingston NV2 M.2 NVMe Gen 4 cost close to WD Black SN770 1TB Gen 4 which is faster so would go with the SN770.
Would go with something like this: https://www.inet.se/kundvagn/visa/N-0oAVWvHwlNPCNMgDngXZI0i_o/namnlos
I'll be swapping out the Kingston NV2 M.2 NVMe Gen 4 for the WD Black SN770 1TB Gen 4. I'm sticking with the Montech case, though - it's got a nice design and comes with four ARGB fans that I really like.
The RAM you picked is running at 6000 MHz, which should be no problem for overclocking. But i just cant add it to the build on Inet. So, what do you suggest?
Take https://www.inet.se/produkt/5306420/corsair-32gb-2x16gb-ddr5-6000mhz-cl36-vengeance-amd-expo
or contact there support and ask.
There are this once as well which you can try: https://www.inet.se/produkt/5306632/corsair-32gb-2x16gb-ddr5-6000mhz-cl30-vengeance-amd-expo-xmp-3-0
If you want cheaper ram i would go with: https://www.inet.se/produkt/5306420/corsair-32gb-2x16gb-ddr5-6000mhz-cl36-vengeance-amd-expo
[borttagen]
If you want a good PC then this one is the best. It has great estethic and will coool your pc fine.